We have different type of single facer for differnettype of 5 ply plant. Single facer type can be changed according to the output of the plant.
RNN-405D Multi- Cassette Positive Pressure Single Facer
- 405D Design speed: 250 m/min.
- Effective width: 1400mm – 2500mm
- Corrugated roller: 405mm
- Using negative pressure type design helps the medium paper to press evenly and closer to the surface of corrugating roll to have perfect forming and also get even gluing on the flute tip to have perfect laminating of the single facer.
- Quick change rolls in 15 minutes, while replacing the corrugated rolls, the whole complete set of additional rolls with cassette is delivered into the machine by the carriage and matched with the hydraulic motor to be fixed on the base of the machine by the hydraulic system. Quickly and easily complete the corrugated roller replacement.
- The corrugating rolls, pressure roll, and glue roll are adopted with the high stability of the airbag control system, also with pneumatic control buffer effect.
- Adopt glue width motorized dividing to match the paper width. Idle running motor for glue applicator roll to avoid glue dry. Adjustment for the gap between glue roller by electric. Digital readout for the gap between glue roll and doctor roll.
- The movable type glue unit is convenient to clean and maintain.
- Easy operation control system. Touchscreen with a colorful drawing display operation state, easy and simple to handle.
- Built-in pre-conditioner with the proportional device for the medium moisture and temperature adjustment.
RNN-360D (320D) Multi Cassette Positive Pressure Single Facer
- 360D design speed: 200 m/min, 320D Design speed: 180 m/min.
- Effective width: 1400 mm – 2500 mm
- Corrugated Roller: 360 mm / 320 mm
- Using negative pressure type design helps the medium paper to press evenly and closer to the surface of the corrugating roll to have perfect forming and also get even gluing on the flute trip to have perfect laminating of the single facer.
- Quick change rolls in 15 minutes, while replacing the corrugated rolls, the whole complete set of additional rolls with cassette is delivered into the machine by the carriage and matched with the hydraulic motor to be fixed on the base of the machine by the hydraulic system. Quickly and easily complete the corrugated roller replacement.
- The corrugating rolls, pressure roll, and glue roll are adopted with the high stability of the airbag control system, also with pneumatic control buffer effect.
- Adopt glue width motorized dividing to match the paper width. Idle running motor for glue applicator roll to avoid glue dry. Adjustment for the gap between glue roller by electric. Digital readout for the gap between glue roll and doctor roll.
- The movable type glue unit is convenient to clean and maintain.
- Easy operation control system. Touchscreen with a colorful drawing display operation state, easy and simple to handle.
- Built-in pre-conditioner with the proportional device for the medium moisture and temperature adjustment.
RNN-380C (405C) Finger Less Type Single Facer
- 380C Design Speed: 200m/min
- 405C Design Speed: 220m/min
- Effective Width: 1400 mm – 2500 mm
- Fingerless Vacuum suction type single facer, the upper and lower corrugated roller made of 48 CrMo alloy steel, with hatted treatment the hardness is above HV1200 the surface is well treated by grind and plated chrome.
- With preheated for liner paper and the steam spray device for the medium paper.
- Upper and lower corrugated roller are the unit assemblage, the whole corrugated rollers group can be moved and quick replacement, to change flute type quickly.
- Glue section is the unit assemblage, the whole section can by track save maintenance time.
- Adjustment for corrugated roller, the pressure roller and glue roller by the pneumatic system.
- Frequency conversion motor as the main drive, independent gearbox connect with three gimbal axis, an inverter to make stepless seed regulation for saving power, and to keep one munication connector for production management
- Oil immersed type lubricating to reduce noise keep running stable prolong the use of life gear.
- Adopt Glue width motorized dividing to match the paper width Idle running motor for glue applicator roll to avoid glue dry. Adjustment for the gap between glue roller and doctor roller by electric or manual are optional, Digital readout for the gap between glue roll and doctor roll is optional.
- Bearing for corrugated roller and pressure roller adopt high temperature lubricate grease to keep running smoothly and durably.
- Glue part can be running independently or non independently while stopped
RNN- 320C (360C) Fingerless Type Single Facer
- 320C Design Speed: 150 m/min 360C Design Speed: 180 m/min
- Effective width: 1400 mm- 2200 mm
- Corrugated roller : 320 mm / 360 mm
- Drive reducer box with oil immersed type lubricating to reduce noise keeps running stable. Adopt gimbal transmission. Separate power. (optional)
- corrugated roller, the pressure roller and glue roller by pneumatic adjustment.
- Cardboard transmit adopt vacuum suction method with wind control system. Keep flute profiles stable of the lower – roller in the condition of running up.
- Bearing of the corrugated and pressure roller to adopt high temperature lubricate grease.
- Glue parts auto supply glue circularly.
- The upper – lower corrugating roller is made of 48 CrMo high-quality alloy steel after heat treatment. The hardness HV1200 the surface be grinded.
- The glue part surface is treated by special mesh snicked and chrome plated.
- Motorized or manual glue width dividing to match the proper width.
- Glue part can be running independently or non independently while stopped.
RNN- 280S Finger Less Single Facer
- Design Speed: 100 m/min
- Effective width: 1400 mm- 2200 mm
- Corrugated roller: 280 mm
- Drive reducer box with oil immersed type lubricating to reduce noise keeps running stable. Adopt gimbal transmission. Separate power. (optional)
- corrugated roller, the pressure roller and glue roller by pneumatic adjustment.
- Cardboard transmit adopt vacuum suction method with wind control system. Keep flute profiles stable of the lower – roller in the condition of running up.
- Bearing of the corrugated and pressure roller to adopt high temperature lubricate grease.
- Glue parts auto supply glue circularly.
- The upper – lower corrugating roller is made of 48 CrMo high-quality alloy steel after heat treatment. The hardness HRC58-60 the surface be grinded.
- The glue part surface is treated by special mesh snicked and chrome plated.
- Motorized or manual glue width dividing to match the proper width.
- Glue part can be running independently or non independently while stopped. Adopt main motor frequency conversion control. (optional)
